iPAddress name constraints bypass when WOLFSSL_IP_ALT_NAME is not defined. IP address name constraints are not enforced in that configuration, allowing a certificate to bypass an issuing CA's IP address constraints.

PKCS7_verify signer confusion allows forged signatures, where the signer associated with a signature is not correctly bound, permitting a forged signature to be accepted.

X.509 name constraint bypass via the Subject Common Name when treated as a DNS-type name. A certificate whose Subject CN violates an issuing CA's DNS name constraints could be accepted.

The PKCS#7 decode path ignores the caller-supplied output buffer size (outputSz), allowing decoded content to be written past the bounds of the provided buffer. This affects wolfSSL 5.9.0 and earlier and was fixed in the 5.9.1 release.

A heap buffer overflow could occur in the DTLS 1.3 ACK serialization path before the connecting peer is authenticated. The buffer overflow was due to an integer truncation when computing the length of the ACK record-number list, causing an undersized buffer to be allocated and then overrun. This affects builds using DTLS 1.3 and wolfSSL version 5.9.0 and earlier. A fix was added to the 5.9.1 release.

Integer underflow in wc_PKCS7_DecryptOri when handling crafted Other Recipient Info, leading to incorrect length handling during decryption.

A CRL critical extension bypass exists in ParseCRL_Extensions where critical extensions are not properly enforced, allowing a crafted CRL with an unhandled critical extension to be accepted. This only affects builds with CRL support enabled and where a crafted CRL had a trusted signature when parsed.

Certificate policy and RFC 8446 compliance concerns regarding the continued acceptance of SHA-1/MD5 in certificate processing.

HMAC zero-length tag forgery in EVP_DigestVerifyFinal, where a zero-length tag could be accepted as valid during HMAC verification. In the OpenSSL-compatibility HMAC verify path the supplied signature length was only checked as not exceeding the MAC length, so a zero-length or otherwise truncated tag could pass verification. The fix requires the supplied tag length to exactly equal the MAC length and rejects a zero-length MAC, so a forged short or empty tag is no longer accepted.

PKCS#12 MAC verification uses an attacker-controlled comparison length, weakening the integrity check on the MAC and allowing a mismatched MAC to be accepted. The PKCS#12 verify path compared the locally computed HMAC against the MAC parsed from the PKCS#12 structure using a length taken directly from the attacker-supplied input, without first verifying that it equals the length of the digest actually produced by the configured algorithm. A truncated or zero-length stored MAC could therefore be accepted, defeating the integrity protection of the MAC.

Out-of-bounds write in SetSuitesHashSigAlgo when processing an oversized signature algorithms list, allowing a write past the bounds of the destination buffer.

Bleichenbacher padding oracle in PKCS#7 KTRI decryption. When decrypting PKCS#7 EnvelopedData using RSA PKCS#1 v1.5 key transport, wolfSSL returned distinguishable error codes depending on whether RSA padding validation failed versus whether the decrypted content was malformed. An attacker able to submit crafted EnvelopedData messages and observe error responses could use this as a padding oracle to incrementally recover the encrypted Content Encryption Key (CEK). The fix generates a deterministic pseudo-random fake CEK on padding failure (via HMAC-SHA256) and proceeds with decryption identically, using constant-time operations throughout, so that all failure paths produce the same error regardless of padding validity.

When HAVE_ENCRYPT_THEN_MAC is configured, the implementation could fall back to MAC-then-Encrypt rather than enforcing Encrypt-then-MAC.

Integer underflow in wolfSSL packet sniffer <= 5.9.0 allows an attacker to cause a program crash in the AEAD decryption path by injecting a TLS record shorter than the explicit IV plus authentication tag into traffic inspected by ssl_DecodePacket. The underflow wraps a 16-bit length to a large value that is passed to AEAD decryption routines, causing a large out-of-bounds read and crash. An unauthenticated attacker can trigger this remotely via malformed TLS Application Data records.

A 1-byte stack buffer over-read was identified in the MatchDomainName function (src/internal.c) during wildcard hostname validation when the LEFT_MOST_WILDCARD_ONLY flag is active. If a wildcard * exhausts the entire hostname string, the function reads one byte past the buffer without a bounds check, which could cause a crash.

AES-GCM encryption/decryption with extremely large cumulative single message sizes (>64 GiB) were not properly rejected by the streaming APIs, allowing counter wrap, keystream reuse, and consequent plaintext recovery.

TLS 1.3 post-handshake authentication (PHA) issue where a server could accept a client's Finished message without the client having sent a Certificate and CertificateVerify. The post-handshake-auth exemption that allows an empty/absent peer certificate was only intended for the initial handshake, but it was also being applied while a post-handshake CertificateRequest was still outstanding. The check is now scoped to the initial handshake only: on the server, once a post-handshake CertificateRequest has been sent (certReqCtx is set), a peer certificate and a valid CertificateVerify are required again before the Finished is accepted, with empty-certificate handling following the configured verify mode (FAIL_IF_NO_PEER_CERT) just as during first-handshake client authentication. Only affects TLS 1.3 servers built with post-handshake authentication support (WOLFSSL_POST_HANDSHAKE_AUTH / --enable-postauth, included in --enable-all) that enable WOLFSSL_VERIFY_POST_HANDSHAKE and request a client certificate after the handshake via wolfSSL_request_certificate(). Clients, and servers that do not use post-handshake authentication, are unaffected.

wolfSSL_PKCS7_verify() returning success for a degenerate (certs-only) PKCS#7 object that contains no signer. Such an object has empty signerInfos, so the underlying signed-data verification succeeds without authenticating any content. The compatibility-layer verify path now rejects the object when no signer signature has actually been verified, so a PKCS#7 carrying no valid signature is no longer reported as verified. This is enforced regardless of the PKCS7_NOVERIFY flag, which only suppresses signer certificate chain validation and was never intended to waive the requirement that a signature exist. Only affects OpenSSL compatibility builds that call the PKCS7_verify() compatibility API on potentially degenerate PKCS#7 bundles.

Un-negotiated Raw Public Key (RFC 7250) accepted in place of an X.509 certificate, bypassing chain validation. A raw public key has no chain, so ParseCertRelative() accepts it without performing any trust verification; it must therefore only be accepted when RPK was actually negotiated for that peer. The check now defaults the expected type to X.509 (per RFC 7250/8446) when no type was negotiated, comparing against the received server certificate type on the client and the selected client certificate type on the server, and rejects any mismatch, including an un-negotiated raw public key, with UNSUPPORTED_CERTIFICATE. Only affects builds with Raw Public Key support (HAVE_RPK) enabled - disabled by default in a standalone build, but included in --enable-all.

Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected.

When restoring a session from cache, a pointer from the serialized session data is used in a free operation without validation. An attacker who can poison the session cache could trigger an arbitrary free. Exploitation requires the ability to inject a crafted session into the cache and for the application to call specific session restore APIs.

A padding oracle exists in wolfSSL's PKCS7 CBC decryption that could allow an attacker to recover plaintext through repeated decryption queries with modified ciphertext. In previous versions of wolfSSL the interior padding bytes are not validated.

In TLSX_EchChangeSNI, the ctx->extensions branch set extensions unconditionally even when TLSX_Find returned NULL. This caused TLSX_UseSNI to attach the attacker-controlled publicName to the shared WOLFSSL_CTX when no inner SNI was configured. TLSX_EchRestoreSNI then failed to clean it up because its removal was gated on serverNameX != NULL. The inner ClientHello was sized before the pollution but written after it, causing TLSX_SNI_Write to memcpy 255 bytes past the allocation boundary.

wolfSSL_X509_verify_cert in the OpenSSL compatibility layer accepts a certificate chain in which the leaf's signature is not checked, if the attacker supplies an untrusted intermediate with Basic Constraints `CA:FALSE` that is legitimately signed by a trusted root. An attacker who obtains any leaf certificate from a trusted CA (e.g. a free DV cert from Let's Encrypt) can forge a certificate for any subject name with any public key and arbitrary signature bytes, and the function returns `WOLFSSL_SUCCESS` / `X509_V_OK`. The native wolfSSL TLS handshake path (`ProcessPeerCerts`) is not susceptible and the issue is limited to applications using the OpenSSL compatibility API directly, which would include integrations of wolfSSL into nginx and haproxy.

wolfSSL's wc_PKCS7_DecodeAuthEnvelopedData() does not properly sanitize the AES-GCM authentication tag length received and has no lower bounds check. A man-in-the-middle can therefore truncate the mac field from 16 bytes to 1 byte, reducing the tag check from 2⁻¹²⁸ to 2⁻⁸.

In wolfSSL's EVP layer, the ChaCha20-Poly1305 AEAD decryption path in wolfSSL_EVP_CipherFinal (and related EVP cipher finalization functions) fails to verify the authentication tag before returning plaintext to the caller. When an application uses the EVP API to perform ChaCha20-Poly1305 decryption, the implementation computes or accepts the tag but does not compare it against the expected value.

An integer overflow existed in the wolfCrypt CMAC implementation, that could be exploited to forge CMAC tags. The function wc_CmacUpdate used the guard `if (cmac->totalSz != 0)` to skip XOR-chaining on the first block (where digest is all-zeros and the XOR is a no-op). However, totalSz is word32 and wraps to zero after 2^28 block flushes (4 GiB), causing the guard to erroneously discard the live CBC-MAC chain state. Any two messages sharing a common suffix beyond the 4 GiB mark then produce identical CMAC tags, enabling a zero-work prefix-substitution forgery. The fix removes the guard, making the XOR unconditional; the no-op property on the first block is preserved because digest is zero-initialized by wc_InitCmac_ex.

wolfSSL's ECCSI signature verifier `wc_VerifyEccsiHash` decodes the `r` and `s` scalars from the signature blob via `mp_read_unsigned_bin` with no check that they lie in `[1, q-1]`. A crafted forged signature could verify against any message for any identity, using only publicly-known constants.

A heap use-after-free exists in wolfSSL's TLS 1.3 post-quantum cryptography (PQC) hybrid KeyShare processing. In the error handling path of TLSX_KeyShare_ProcessPqcHybridClient() in src/tls.c, the inner function TLSX_KeyShare_ProcessPqcClient_ex() frees a KyberKey object upon encountering an error. The caller then invokes TLSX_KeyShare_FreeAll(), which attempts to call ForceZero() on the already-freed KyberKey, resulting in writes of zero bytes over freed heap memory.

X.509 date buffer overflow in wolfSSL_X509_notAfter / wolfSSL_X509_notBefore. A buffer overflow may occur when parsing date fields from a crafted X.509 certificate via the compatibility layer API. This is only triggered when calling these two APIs directly from an application, and does not affect TLS or certificate verify operations in wolfSSL.

Heap buffer overflow in CertFromX509 via AuthorityKeyIdentifier size confusion. A heap buffer overflow occurs when converting an X.509 certificate internally due to incorrect size handling of the AuthorityKeyIdentifier extension.

In wolfSSL, ARIA-GCM cipher suites used in TLS 1.2 and DTLS 1.2 reuse an identical 12-byte GCM nonce for every application-data record. Because wc_AriaEncrypt is stateless and passes the caller-supplied IV verbatim to the MagicCrypto SDK with no internal counter, and because the explicit IV is zero-initialized at session setup and never incremented in non-FIPS builds. This vulnerability affects wolfSSL builds configured with --enable-aria and the proprietary MagicCrypto SDK (a non-default, opt-in configuration required for Korean regulatory deployments). AES-GCM is not affected because wc_AesGcmEncrypt_ex maintains an internal invocation counter independently of the call-site guard.

Dual-Algorithm CertificateVerify out-of-bounds read. When processing a dual-algorithm CertificateVerify message, an out-of-bounds read can occur on crafted input. This can only occur when --enable-experimental and --enable-dual-alg-certs is used when building wolfSSL.

Heap out-of-bounds read in PKCS7 parsing. A crafted PKCS7 message can trigger an OOB read on the heap. The missing bounds check is in the indefinite-length end-of-content verification loop in PKCS7_VerifySignedData().

A stack buffer overflow exists in wolfSSL's PKCS7 implementation in the wc_PKCS7_DecryptOri() function in wolfcrypt/src/pkcs7.c. When processing a CMS EnvelopedData message containing an OtherRecipientInfo (ORI) recipient, the function copies an ASN.1-parsed OID into a fixed 32-byte stack buffer (oriOID[MAX_OID_SZ]) via XMEMCPY without first validating that the parsed OID length does not exceed MAX_OID_SZ. A crafted CMS EnvelopedData message with an ORI recipient containing an OID longer than 32 bytes triggers a stack buffer overflow. Exploitation requires the library to be built with --enable-pkcs7 (disabled by default) and the application to have registered an ORI decrypt callback via wc_PKCS7_SetOriDecryptCb().

Heap buffer overflow in DTLS 1.3 ACK message processing. A remote attacker can send a crafted DTLS 1.3 ACK message that triggers a heap buffer overflow.

URI nameConstraints from constrained intermediate CAs are parsed but not enforced during certificate chain verification in wolfcrypt/src/asn.c. A compromised or malicious sub-CA could issue leaf certificates with URI SAN entries that violate the nameConstraints of the issuing CA, and wolfSSL would accept them as valid.

Missing hash/digest size and OID checks allow digests smaller than allowed when verifying ECDSA certificates, or smaller than is appropriate for the relevant key type, to be accepted by signature verification functions. This could lead to reduced security of ECDSA certificate-based authentication if the public CA key used is also known. This affects ECDSA/ECC verification when EdDSA or ML-DSA is also enabled.

An integer underflow issue exists in wolfSSL when parsing the Subject Alternative Name (SAN) extension of X.509 certificates. A malformed certificate can specify an entry length larger than the enclosing sequence, causing the internal length counter to wrap during parsing. This results in incorrect handling of certificate data. The issue is limited to configurations using the original ASN.1 parsing implementation which is off by default.

Two potential heap out-of-bounds write locations existed in DecodeObjectId() in wolfcrypt/src/asn.c. First, a bounds check only validates one available slot before writing two OID arc values (out[0] and out[1]), enabling a 2-byte out-of-bounds write when outSz equals 1. Second, multiple callers pass sizeof(decOid) (64 bytes on 64-bit platforms) instead of the element count MAX_OID_SZ (32), causing the function to accept crafted OIDs with 33 or more arcs that write past the end of the allocated buffer.

Heap-based buffer overflow in the KCAPI ECC code path of wc_ecc_import_x963_ex() in wolfSSL wolfcrypt allows a remote attacker to write attacker-controlled data past the bounds of the pubkey_raw buffer via a crafted oversized EC public key point. The WOLFSSL_KCAPI_ECC code path copies the input to key->pubkey_raw (132 bytes) using XMEMCPY without a bounds check, unlike the ATECC code path which includes a length validation. This can be triggered during TLS key exchange when a malicious peer sends a crafted ECPoint in ServerKeyExchange.

1-byte OOB heap read in wc_PKCS7_DecodeEnvelopedData via zero-length encrypted content. A vulnerability existed in wolfSSL 5.8.4 and earlier, where a 1-byte out-of-bounds heap read in wc_PKCS7_DecodeEnvelopedData could be triggered by a crafted CMS EnvelopedData message with zero-length encrypted content. Note that PKCS7 support is disabled by default.

Stack Buffer Overflow in wc_HpkeLabeledExtract via Oversized ECH Config. A vulnerability existed in wolfSSL 5.8.4 ECH (Encrypted Client Hello) support, where a maliciously crafted ECH config could cause a stack buffer overflow on the client side, leading to potential remote execution and client program crash. This could be exploited by a malicious TLS server supporting ECH. Note that ECH is off by default, and is only enabled with enable-ech.

Heap Overflow in TLS 1.3 ECH parsing. An integer underflow existed in ECH extension parsing logic when calculating a buffer length, which resulted in writing beyond the bounds of an allocated buffer. Note that in wolfSSL, ECH is off by default, and the ECH standard is still evolving.

Two buffer overflow vulnerabilities existed in the wolfSSL CRL parser when parsing CRL numbers: a heap-based buffer overflow could occur when improperly storing the CRL number as a hexadecimal string, and a stack-based overflow for sufficiently sized CRL numbers. With appropriately crafted CRLs, either of these out of bound writes could be triggered. Note this only affects builds that specifically enable CRL support, and the user would need to load a CRL from an untrusted source.

Out-of-bounds read in ALPN parsing due to incomplete validation. wolfSSL 5.8.4 and earlier contained an out-of-bounds read in ALPN handling when built with ALPN enabled (HAVE_ALPN / --enable-alpn). A crafted ALPN protocol list could trigger an out-of-bounds read, leading to a potential process crash (denial of service). Note that ALPN is disabled by default, but is enabled for these 3rd party compatibility features: enable-apachehttpd, enable-bind, enable-curl, enable-haproxy, enable-hitch, enable-lighty, enable-jni, enable-nginx, enable-quic.

Missing required cryptographic step in the TLS 1.3 client HelloRetryRequest handshake logic in wolfSSL could lead to a compromise in the confidentiality of TLS-protected communications via a crafted HelloRetryRequest followed by a ServerHello message that omits the required key_share extension, resulting in derivation of predictable traffic secrets from (EC)DHE shared secret. This issue does not affect the client's authentication of the server during TLS handshakes.

An integer overflow vulnerability existed in the static function wolfssl_add_to_chain, that caused heap corruption when certificate data was written out of bounds of an insufficiently sized certificate buffer. wolfssl_add_to_chain is called by these API: wolfSSL_CTX_add_extra_chain_cert, wolfSSL_CTX_add1_chain_cert, wolfSSL_add0_chain_cert. These API are enabled for 3rd party compatibility features: enable-opensslall, enable-opensslextra, enable-lighty, enable-stunnel, enable-nginx, enable-haproxy. This issue is not remotely exploitable, and would require that the application context loading certificates is compromised.

A heap-buffer-overflow vulnerability exists in wolfSSL's wolfSSL_d2i_SSL_SESSION() function. When deserializing session data with SESSION_CERTS enabled, certificate and session id lengths are read from an untrusted input without bounds validation, allowing an attacker to overflow fixed-size buffers and corrupt heap memory. A maliciously crafted session would need to be loaded from an external source to trigger this vulnerability. Internal sessions were not vulnerable.

In wolfSSL 5.8.2 and earlier, a logic flaw existed in the TLS 1.2 server state machine implementation. The server could incorrectly accept the CertificateVerify message before the ClientKeyExchange message had been received. This issue affects wolfSSL before 5.8.4 (wolfSSL 5.8.2 and earlier is vulnerable, 5.8.4 is not vulnerable). In 5.8.4 wolfSSL would detect the issue later in the handshake. 5.9.0 was further hardened to catch the issue earlier in the handshake.

Out-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key without checking that the key is at least that long. A public key shorter than 65 bytes results in an out-of-bounds heap read, leading to a potential crash (denial of service); there is no out-of-bounds write. Note this only affects builds with SM2 support (--enable-sm2 or --enable-all).

Missing SNI/ALPN binding on stateful (session-ID) resumption, which previously skipped the binding check performed for ticket-based resumption. A cached session could be resumed under a different SNI/ALPN than originally negotiated and, where client-authentication policy differs across virtual hosts, carry the cached peer-authentication state into a context it was not established for. Resumption now verifies the SNI/ALPN binding for all paths and declines (falling back to a full handshake) on mismatch.

Certificates with wildcard DNS SANs (e.g. *.example.com) bypassed CA name-constraint checks. A certificate with a wildcard DNS SAN that should be rejected by the issuing CA's permitted/excluded DNS name constraints could be accepted.

The X25519 x86_64 assembly implementation fails to clear the most significant bit during the final modular reduction, so the computed result may not be fully reduced modulo the field prime 2^255 - 19. This can leave the field element in a non-canonical form, producing an incorrect result from the scalar multiplication and potentially a wrong shared secret. The final carry-propagation chains in the x64 and AVX2 reduction routines could overflow into the top bit, and the high limb was not masked afterward, so the 255-bit field element was left non-canonical.

OCSP CertID serial-number length-confusion in wolfSSL_OCSP_resp_find_status allows a same-issuer SingleResponse whose serial is a prefix of the target serial to be reported as the revocation status of a different certificate. The lookup compared serial-number bytes without first requiring the two serial numbers to be of equal length, so a SingleResponse for one certificate (same issuer) whose serial is a prefix of the target's serial would match, returning the wrong certificate's status. The fix requires the serial lengths to be equal before comparing the serial bytes.

wolfSSL's AVX2-optimized ML-KEM implementation (mlkem_cmp_avx2) compares only 1536 of the 1568 ciphertext bytes during the Fujisaki-Okamoto re-encryption check in ML-KEM-1024 decapsulation. Ciphertexts that differ from the expected re-encryption solely in bytes 1536-1567 bypass implicit rejection and are accepted as valid, breaking IND-CCA2 security. An attacker able to submit chosen ciphertexts to a decapsulation oracle that uses a static ML-KEM-1024 key, and to observe whether the genuine shared secret or the implicit-rejection secret was produced, can use this as a plaintext-checking oracle to recover the private key. A proof of concept recovered a full ML-KEM-1024 private key with approximately 98% success using roughly 350 chosen ciphertexts. The flaw is a deterministic logic error and does not rely on timing measurements.

Integer underflow in wolfSSL packet sniffer <= 5.8.4 allows an attacker to cause a buffer overflow in the AEAD decryption path by injecting a TLS record shorter than the explicit IV plus authentication tag into traffic inspected by ssl_DecodePacket. The underflow wraps a 16-bit length to a large value that is passed to AEAD decryption routines, causing heap buffer overflow and a crash. An unauthenticated attacker can trigger this remotely via malformed TLS Application Data records.

A stack buffer overflow vulnerability exists in wolfSSL's PKCS7 SignedData encoding functionality. In wc_PKCS7_BuildSignedAttributes(), when adding custom signed attributes, the code passes an incorrect capacity value (esd->signedAttribsCount) to EncodeAttributes() instead of the remaining available space in the fixed-size signedAttribs[7] array. When an application sets pkcs7->signedAttribsSz to a value greater than MAX_SIGNED_ATTRIBS_SZ (default 7) minus the number of default attributes already added, EncodeAttributes() writes beyond the array bounds, causing stack memory corruption. In WOLFSSL_SMALL_STACK builds, this becomes heap corruption. Exploitation requires an application that allows untrusted input to control the signedAttribs array size when calling wc_PKCS7_EncodeSignedData() or related signing functions.

A certificate verification error in wolfSSL when building with the WOLFSSL_SYS_CA_CERTS and WOLFSSL_APPLE_NATIVE_CERT_VALIDATION options results in the wolfSSL client failing to properly verify the server certificate's domain name, allowing any certificate issued by a trusted CA to be accepted regardless of the hostname.

In the OpenSSL compatibility layer implementation, the function RAND_poll() was not behaving as expected and leading to the potential for predictable values returned from RAND_bytes() after fork() is called. This can lead to weak or predictable random numbers generated in applications that are both using RAND_bytes() and doing fork() operations. This only affects applications explicitly calling RAND_bytes() after fork() and does not affect any internal TLS operations. Although RAND_bytes() documentation in OpenSSL calls out not being safe for use with fork() without first calling RAND_poll(), an additional code change was also made in wolfSSL to make RAND_bytes() behave similar to OpenSSL after a fork() call without calling RAND_poll(). Now the Hash-DRBG used gets reseeded after detecting running in a new process. If making use of RAND_bytes() and calling fork() we recommend updating to the latest version of wolfSSL. Thanks to Per Allansson from Appgate for the report.

Multiple constant-time implementations in wolfSSL before version 5.8.4 may be transformed into non-constant-time binary by LLVM optimizations, which can potentially result in observable timing discrepancies and lead to information disclosure through timing side-channel attacks.