The adjustments made for XSA-379 as well as those subsequently becoming XSA-387 still left a race window, when a HVM or PVH guest does a grant table version change from v2 to v1 in parallel with mapping the status page(s) via XENMEM_add_to_physmap. Some of the status pages may then be freed while mappings of them would still be inserted into the guest's secondary (P2M) page tables.

Any guest can cause xenstored to crash by issuing a XS_RESET_WATCHES command within a transaction due to an assert() triggering. In case xenstored was built with NDEBUG #defined nothing bad will happen, as assert() is doing nothing in this case. Note that the default is not to define NDEBUG for xenstored builds even in release builds of Xen.

In the context switch logic Xen attempts to skip an IBPB in the case of a vCPU returning to a CPU on which it was the previous vCPU to run. While safe for Xen's isolation between vCPUs, this prevents the guest kernel correctly isolating between tasks. Consider: 1) vCPU runs on CPU A, running task 1. 2) vCPU moves to CPU B, idle gets scheduled on A. Xen skips IBPB. 3) On CPU B, guest kernel switches from task 1 to 2, issuing IBPB. 4) vCPU moves back to CPU A. Xen skips IBPB again. Now, task 2 is running on CPU A with task 1's training still in the BTB.

When passing through PCI devices, the detach logic in libxl won't remove access permissions to any 64bit memory BARs the device might have. As a result a domain can still have access any 64bit memory BAR when such device is no longer assigned to the domain. For PV domains the permission leak allows the domain itself to map the memory in the page-tables. For HVM it would require a compromised device model or stubdomain to map the leaked memory into the HVM domain p2m.

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are two issues related to the mapping of pages belonging to other domains: For one, an assertion is wrong there, where the case actually needs handling. A NULL pointer de-reference could result on a release build. This is CVE-2025-58144. And then the P2M lock isn't held until a page reference was actually obtained (or the attempt to do so has failed). Otherwise the page can not only change type, but even ownership in between, thus allowing domain boundaries to be violated. This is CVE-2025-58145.

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are two issues related to the mapping of pages belonging to other domains: For one, an assertion is wrong there, where the case actually needs handling. A NULL pointer de-reference could result on a release build. This is CVE-2025-58144. And then the P2M lock isn't held until a page reference was actually obtained (or the attempt to do so has failed). Otherwise the page can not only change type, but even ownership in between, thus allowing domain boundaries to be violated. This is CVE-2025-58145.

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are multiple issues related to the handling and accessing of guest memory pages in the viridian code: 1. A NULL pointer dereference in the updating of the reference TSC area. This is CVE-2025-27466. 2. A NULL pointer dereference by assuming the SIM page is mapped when a synthetic timer message has to be delivered. This is CVE-2025-58142. 3. A race in the mapping of the reference TSC page, where a guest can get Xen to free a page while still present in the guest physical to machine (p2m) page tables. This is CVE-2025-58143.

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are multiple issues related to the handling and accessing of guest memory pages in the viridian code: 1. A NULL pointer dereference in the updating of the reference TSC area. This is CVE-2025-27466. 2. A NULL pointer dereference by assuming the SIM page is mapped when a synthetic timer message has to be delivered. This is CVE-2025-58142. 3. A race in the mapping of the reference TSC page, where a guest can get Xen to free a page while still present in the guest physical to machine (p2m) page tables. This is CVE-2025-58143.

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are multiple issues related to the handling and accessing of guest memory pages in the viridian code: 1. A NULL pointer dereference in the updating of the reference TSC area. This is CVE-2025-27466. 2. A NULL pointer dereference by assuming the SIM page is mapped when a synthetic timer message has to be delivered. This is CVE-2025-58142. 3. A race in the mapping of the reference TSC page, where a guest can get Xen to free a page while still present in the guest physical to machine (p2m) page tables. This is CVE-2025-58143.

Certain instructions need intercepting and emulating by Xen. In some cases Xen emulates the instruction by replaying it, using an executable stub. Some instructions may raise an exception, which is supposed to be handled gracefully. Certain replayed instructions have additional logic to set up and recover the changes to the arithmetic flags. For replayed instructions where the flags recovery logic is used, the metadata for exception handling was incorrect, preventing Xen from handling the the exception gracefully, treating it as fatal instead.

When setting up interrupt remapping for legacy PCI(-X) devices, including PCI(-X) bridges, a lookup of the upstream bridge is required. This lookup, itself involving acquiring of a lock, is done in a context where acquiring that lock is unsafe. This can lead to a deadlock.

PVH guests have their ACPI tables constructed by the toolstack. The construction involves building the tables in local memory, which are then copied into guest memory. While actually used parts of the local memory are filled in correctly, excess space that is being allocated is left with its prior contents.

The hypervisor contains code to accelerate VGA memory accesses for HVM guests, when the (virtual) VGA is in "standard" mode. Locking involved there has an unusual discipline, leaving a lock acquired past the return from the function that acquired it. This behavior results in a problem when emulating an instruction with two memory accesses, both of which touch VGA memory (plus some further constraints which aren't relevant here). When emulating the 2nd access, the lock that is already being held would be attempted to be re-acquired, resulting in a deadlock. This deadlock was already found when the code was first introduced, but was analysed incorrectly and the fix was incomplete. Analysis in light of the new finding cannot find a way to make the existing locking discipline work. In staging, this logic has all been removed because it was discovered to be accidentally disabled since Xen 4.7. Therefore, we are fixing the locking problem by backporting the removal of most of the feature. Note that even with the feature disabled, the lock would still be acquired for any accesses to the VGA MMIO region.

In x86's APIC (Advanced Programmable Interrupt Controller) architecture, error conditions are reported in a status register. Furthermore, the OS can opt to receive an interrupt when a new error occurs. It is possible to configure the error interrupt with an illegal vector, which generates an error when an error interrupt is raised. This case causes Xen to recurse through vlapic_error(). The recursion itself is bounded; errors accumulate in the the status register and only generate an interrupt when a new status bit becomes set. However, the lock protecting this state in Xen will try to be taken recursively, and deadlock.

Certain PCI devices in a system might be assigned Reserved Memory Regions (specified via Reserved Memory Region Reporting, "RMRR") for Intel VT-d or Unity Mapping ranges for AMD-Vi. These are typically used for platform tasks such as legacy USB emulation. Since the precise purpose of these regions is unknown, once a device associated with such a region is active, the mappings of these regions need to remain continuouly accessible by the device. In the logic establishing these mappings, error handling was flawed, resulting in such mappings to potentially remain in place when they should have been removed again. Respective guests would then gain access to memory regions which they aren't supposed to have access to.

An optional feature of PCI MSI called "Multiple Message" allows a device to use multiple consecutive interrupt vectors. Unlike for MSI-X, the setting up of these consecutive vectors needs to happen all in one go. In this handling an error path could be taken in different situations, with or without a particular lock held. This error path wrongly releases the lock even when it is not currently held.

Because of a logical error in XSA-407 (Branch Type Confusion), the mitigation is not applied properly when it is intended to be used. XSA-434 (Speculative Return Stack Overflow) uses the same infrastructure, so is equally impacted. For more details, see: https://xenbits.xen.org/xsa/advisory-407.html https://xenbits.xen.org/xsa/advisory-434.html

Unlike 32-bit PV guests, HVM guests may switch freely between 64-bit and other modes. This in particular means that they may set registers used to pass 32-bit-mode hypercall arguments to values outside of the range 32-bit code would be able to set them to. When processing of hypercalls takes a considerable amount of time, the hypervisor may choose to invoke a hypercall continuation. Doing so involves putting (perhaps updated) hypercall arguments in respective registers. For guests not running in 64-bit mode this further involves a certain amount of translation of the values. Unfortunately internal sanity checking of these translated values assumes high halves of registers to always be clear when invoking a hypercall. When this is found not to be the case, it triggers a consistency check in the hypervisor and causes a crash.

Recent x86 CPUs offer functionality named Control-flow Enforcement Technology (CET). A sub-feature of this are Shadow Stacks (CET-SS). CET-SS is a hardware feature designed to protect against Return Oriented Programming attacks. When enabled, traditional stacks holding both data and return addresses are accompanied by so called "shadow stacks", holding little more than return addresses. Shadow stacks aren't writable by normal instructions, and upon function returns their contents are used to check for possible manipulation of a return address coming from the traditional stack. In particular certain memory accesses need intercepting by Xen. In various cases the necessary emulation involves kind of replaying of the instruction. Such replaying typically involves filling and then invoking of a stub. Such a replayed instruction may raise an exceptions, which is expected and dealt with accordingly. Unfortunately the interaction of both of the above wasn't right: Recovery involves removal of a call frame from the (traditional) stack. The counterpart of this operation for the shadow stack was missing.

PCI devices can make use of a functionality called phantom functions, that when enabled allows the device to generate requests using the IDs of functions that are otherwise unpopulated. This allows a device to extend the number of outstanding requests. Such phantom functions need an IOMMU context setup, but failure to setup the context is not fatal when the device is assigned. Not failing device assignment when such failure happens can lead to the primary device being assigned to a guest, while some of the phantom functions are assigned to a different domain.

Arm provides multiple helpers to clean & invalidate the cache for a given region. This is, for instance, used when allocating guest memory to ensure any writes (such as the ones during scrubbing) have reached memory before handing over the page to a guest. Unfortunately, the arithmetics in the helpers can overflow and would then result to skip the cache cleaning/invalidation. Therefore there is no guarantee when all the writes will reach the memory. This undefined behavior was meant to be addressed by XSA-437, but the approach was not sufficient.

The fixes for XSA-422 (Branch Type Confusion) and XSA-434 (Speculative Return Stack Overflow) are not IRQ-safe. It was believed that the mitigations always operated in contexts with IRQs disabled. However, the original XSA-254 fix for Meltdown (XPTI) deliberately left interrupts enabled on two entry paths; one unconditionally, and one conditionally on whether XPTI was active. As BTC/SRSO and Meltdown affect different CPU vendors, the mitigations are not active together by default. Therefore, there is a race condition whereby a malicious PV guest can bypass BTC/SRSO protections and launch a BTC/SRSO attack against Xen.

The current setup of the quarantine page tables assumes that the quarantine domain (dom_io) has been initialized with an address width of DEFAULT_DOMAIN_ADDRESS_WIDTH (48) and hence 4 page table levels. However dom_io being a PV domain gets the AMD-Vi IOMMU page tables levels based on the maximum (hot pluggable) RAM address, and hence on systems with no RAM above the 512GB mark only 3 page-table levels are configured in the IOMMU. On systems without RAM above the 512GB boundary amd_iommu_quarantine_init() will setup page tables for the scratch page with 4 levels, while the IOMMU will be configured to use 3 levels only, resulting in the last page table directory (PDE) effectively becoming a page table entry (PTE), and hence a device in quarantine mode gaining write access to the page destined to be a PDE. Due to this page table level mismatch, the sink page the device gets read/write access to is no longer cleared between device assignment, possibly leading to data leaks.

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] AMD CPUs since ~2014 have extensions to normal x86 debugging functionality. Xen supports guests using these extensions. Unfortunately there are errors in Xen's handling of the guest state, leading to denials of service. 1) CVE-2023-34327 - An HVM vCPU can end up operating in the context of a previous vCPUs debug mask state. 2) CVE-2023-34328 - A PV vCPU can place a breakpoint over the live GDT. This allows the PV vCPU to exploit XSA-156 / CVE-2015-8104 and lock up the CPU entirely.

The caching invalidation guidelines from the AMD-Vi specification (48882—Rev 3.07-PUB—Oct 2022) is incorrect on some hardware, as devices will malfunction (see stale DMA mappings) if some fields of the DTE are updated but the IOMMU TLB is not flushed. Such stale DMA mappings can point to memory ranges not owned by the guest, thus allowing access to unindented memory regions.

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] libfsimage contains parsing code for several filesystems, most of them based on grub-legacy code. libfsimage is used by pygrub to inspect guest disks. Pygrub runs as the same user as the toolstack (root in a priviledged domain). At least one issue has been reported to the Xen Security Team that allows an attacker to trigger a stack buffer overflow in libfsimage. After further analisys the Xen Security Team is no longer confident in the suitability of libfsimage when run against guest controlled input with super user priviledges. In order to not affect current deployments that rely on pygrub patches are provided in the resolution section of the advisory that allow running pygrub in deprivileged mode. CVE-2023-4949 refers to the original issue in the upstream grub project ("An attacker with local access to a system (either through a disk or external drive) can present a modified XFS partition to grub-legacy in such a way to exploit a memory corruption in grub’s XFS file system implementation.") CVE-2023-34325 refers specifically to the vulnerabilities in Xen's copy of libfsimage, which is decended from a very old version of grub.

When a transaction is committed, C Xenstored will first check the quota is correct before attempting to commit any nodes. It would be possible that accounting is temporarily negative if a node has been removed outside of the transaction. Unfortunately, some versions of C Xenstored are assuming that the quota cannot be negative and are using assert() to confirm it. This will lead to C Xenstored crash when tools are built without -DNDEBUG (this is the default).

For migration as well as to work around kernels unaware of L1TF (see XSA-273), PV guests may be run in shadow paging mode. Since Xen itself needs to be mapped when PV guests run, Xen and shadowed PV guests run directly the respective shadow page tables. For 64-bit PV guests this means running on the shadow of the guest root page table. In the course of dealing with shortage of memory in the shadow pool associated with a domain, shadows of page tables may be torn down. This tearing down may include the shadow root page table that the CPU in question is presently running on. While a precaution exists to supposedly prevent the tearing down of the underlying live page table, the time window covered by that precaution isn't large enough.

Arm provides multiple helpers to clean & invalidate the cache for a given region. This is, for instance, used when allocating guest memory to ensure any writes (such as the ones during scrubbing) have reached memory before handing over the page to a guest. Unfortunately, the arithmetics in the helpers can overflow and would then result to skip the cache cleaning/invalidation. Therefore there is no guarantee when all the writes will reach the memory.

Cortex-A77 cores (r0p0 and r1p0) are affected by erratum 1508412 where software, under certain circumstances, could deadlock a core due to the execution of either a load to device or non-cacheable memory, and either a store exclusive or register read of the Physical Address Register (PAR_EL1) in close proximity.

The fix for XSA-423 added logic to Linux'es netback driver to deal with a frontend splitting a packet in a way such that not all of the headers would come in one piece. Unfortunately the logic introduced there didn't account for the extreme case of the entire packet being split into as many pieces as permitted by the protocol, yet still being smaller than the area that's specially dealt with to keep all (possible) headers together. Such an unusual packet would therefore trigger a buffer overrun in the driver.

x86/HVM pinned cache attributes mis-handling T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] To allow cachability control for HVM guests with passed through devices, an interface exists to explicitly override defaults which would otherwise be put in place. While not exposed to the affected guests themselves, the interface specifically exists for domains controlling such guests. This interface may therefore be used by not fully privileged entities, e.g. qemu running deprivileged in Dom0 or qemu running in a so called stub-domain. With this exposure it is an issue that - the number of the such controlled regions was unbounded (CVE-2022-42333), - installation and removal of such regions was not properly serialized (CVE-2022-42334).

x86/HVM pinned cache attributes mis-handling T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] To allow cachability control for HVM guests with passed through devices, an interface exists to explicitly override defaults which would otherwise be put in place. While not exposed to the affected guests themselves, the interface specifically exists for domains controlling such guests. This interface may therefore be used by not fully privileged entities, e.g. qemu running deprivileged in Dom0 or qemu running in a so called stub-domain. With this exposure it is an issue that - the number of the such controlled regions was unbounded (CVE-2022-42333), - installation and removal of such regions was not properly serialized (CVE-2022-42334).

x86 shadow plus log-dirty mode use-after-free In environments where host assisted address translation is necessary but Hardware Assisted Paging (HAP) is unavailable, Xen will run guests in so called shadow mode. Shadow mode maintains a pool of memory used for both shadow page tables as well as auxiliary data structures. To migrate or snapshot guests, Xen additionally runs them in so called log-dirty mode. The data structures needed by the log-dirty tracking are part of aformentioned auxiliary data. In order to keep error handling efforts within reasonable bounds, for operations which may require memory allocations shadow mode logic ensures up front that enough memory is available for the worst case requirements. Unfortunately, while page table memory is properly accounted for on the code path requiring the potential establishing of new shadows, demands by the log-dirty infrastructure were not taken into consideration. As a result, just established shadow page tables could be freed again immediately, while other code is still accessing them on the assumption that they would remain allocated.

x86: speculative vulnerability in 32bit SYSCALL path Due to an oversight in the very original Spectre/Meltdown security work (XSA-254), one entrypath performs its speculation-safety actions too late. In some configurations, there is an unprotected RET instruction which can be attacked with a variety of speculative attacks.

Xenstore: Guests can create arbitrary number of nodes via transactions T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] In case a node has been created in a transaction and it is later deleted in the same transaction, the transaction will be terminated with an error. As this error is encountered only when handling the deleted node at transaction finalization, the transaction will have been performed partially and without updating the accounting information. This will enable a malicious guest to create arbitrary number of nodes.

Xenstore: Guests can create arbitrary number of nodes via transactions T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] In case a node has been created in a transaction and it is later deleted in the same transaction, the transaction will be terminated with an error. As this error is encountered only when handling the deleted node at transaction finalization, the transaction will have been performed partially and without updating the accounting information. This will enable a malicious guest to create arbitrary number of nodes.

Oxenstored 32->31 bit integer truncation issues Integers in Ocaml are 63 or 31 bits of signed precision. The Ocaml Xenbus library takes a C uint32_t out of the ring and casts it directly to an Ocaml integer. In 64-bit Ocaml builds this is fine, but in 32-bit builds, it truncates off the most significant bit, and then creates unsigned/signed confusion in the remainder. This in turn can feed a negative value into logic not expecting a negative value, resulting in unexpected exceptions being thrown. The unexpected exception is not handled suitably, creating a busy-loop trying (and failing) to take the bad packet out of the xenstore ring.

Xenstore: Guests can cause Xenstore to not free temporary memory When working on a request of a guest, xenstored might need to allocate quite large amounts of memory temporarily. This memory is freed only after the request has been finished completely. A request is regarded to be finished only after the guest has read the response message of the request from the ring page. Thus a guest not reading the response can cause xenstored to not free the temporary memory. This can result in memory shortages causing Denial of Service (DoS) of xenstored.

lock order inversion in transitive grant copy handling As part of XSA-226 a missing cleanup call was inserted on an error handling path. While doing so, locking requirements were not paid attention to. As a result two cooperating guests granting each other transitive grants can cause locks to be acquired nested within one another, but in respectively opposite order. With suitable timing between the involved grant copy operations this may result in the locking up of a CPU.

Arm: unbounded memory consumption for 2nd-level page tables Certain actions require e.g. removing pages from a guest's P2M (Physical-to-Machine) mapping. When large pages are in use to map guest pages in the 2nd-stage page tables, such a removal operation may incur a memory allocation (to replace a large mapping with individual smaller ones). These memory allocations are taken from the global memory pool. A malicious guest might be able to cause the global memory pool to be exhausted by manipulating its own P2M mappings.

P2M pool freeing may take excessively long The P2M pool backing second level address translation for guests may be of significant size. Therefore its freeing may take more time than is reasonable without intermediate preemption checks. Such checking for the need to preempt was so far missing.

insufficient TLB flush for x86 PV guests in shadow mode For migration as well as to work around kernels unaware of L1TF (see XSA-273), PV guests may be run in shadow paging mode. To address XSA-401, code was moved inside a function in Xen. This code movement missed a variable changing meaning / value between old and new code positions. The now wrong use of the variable did lead to a wrong TLB flush condition, omitting flushes where such are necessary.

x86 pv: Insufficient care with non-coherent mappings T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Xen maintains a type reference count for pages, in addition to a regular reference count. This scheme is used to maintain invariants required for Xen's safety, e.g. PV guests may not have direct writeable access to pagetables; updates need auditing by Xen. Unfortunately, Xen's safety logic doesn't account for CPU-induced cache non-coherency; cases where the CPU can cause the content of the cache to be different to the content in main memory. In such cases, Xen's safety logic can incorrectly conclude that the contents of a page is safe.

x86 pv: Insufficient care with non-coherent mappings T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Xen maintains a type reference count for pages, in addition to a regular reference count. This scheme is used to maintain invariants required for Xen's safety, e.g. PV guests may not have direct writeable access to pagetables; updates need auditing by Xen. Unfortunately, Xen's safety logic doesn't account for CPU-induced cache non-coherency; cases where the CPU can cause the content of the cache to be different to the content in main memory. In such cases, Xen's safety logic can incorrectly conclude that the contents of a page is safe.

x86 pv: Race condition in typeref acquisition Xen maintains a type reference count for pages, in addition to a regular reference count. This scheme is used to maintain invariants required for Xen's safety, e.g. PV guests may not have direct writeable access to pagetables; updates need auditing by Xen. Unfortunately, the logic for acquiring a type reference has a race condition, whereby a safely TLB flush is issued too early and creates a window where the guest can re-establish the read/write mapping before writeability is prohibited.

race in VT-d domain ID cleanup Xen domain IDs are up to 15 bits wide. VT-d hardware may allow for only less than 15 bits to hold a domain ID associating a physical device with a particular domain. Therefore internally Xen domain IDs are mapped to the smaller value range. The cleaning up of the housekeeping structures has a race, allowing for VT-d domain IDs to be leaked and flushes to be bypassed.

Insufficient cleanup of passed-through device IRQs The management of IRQs associated with physical devices exposed to x86 HVM guests involves an iterative operation in particular when cleaning up after the guest's use of the device. In the case where an interrupt is not quiescent yet at the time this cleanup gets invoked, the cleanup attempt may be scheduled to be retried. When multiple interrupts are involved, this scheduling of a retry may get erroneously skipped. At the same time pointers may get cleared (resulting in a de-reference of NULL) and freed (resulting in a use-after-free), while other code would continue to assume them to be valid.

arm: guest_physmap_remove_page not removing the p2m mappings The functions to remove one or more entries from a guest p2m pagetable on Arm (p2m_remove_mapping, guest_physmap_remove_page, and p2m_set_entry with mfn set to INVALID_MFN) do not actually clear the pagetable entry if the entry doesn't have the valid bit set. It is possible to have a valid pagetable entry without the valid bit set when a guest operating system uses set/way cache maintenance instructions. For instance, a guest issuing a set/way cache maintenance instruction, then calling the XENMEM_decrease_reservation hypercall to give back memory pages to Xen, might be able to retain access to those pages even after Xen started reusing them for other purposes.

Incomplete cleanup in specific special register write operations for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.

Incomplete cleanup in specific special register read operations for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.

Incomplete cleanup of microarchitectural fill buffers on some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.

Incomplete cleanup of multi-core shared buffers for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.

PoD operations on misaligned GFNs T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] x86 HVM and PVH guests may be started in populate-on-demand (PoD) mode, to provide a way for them to later easily have more memory assigned. Guests are permitted to control certain P2M aspects of individual pages via hypercalls. These hypercalls may act on ranges of pages specified via page orders (resulting in a power-of-2 number of pages). The implementation of some of these hypercalls for PoD does not enforce the base page frame number to be suitably aligned for the specified order, yet some code involved in PoD handling actually makes such an assumption. These operations are XENMEM_decrease_reservation (CVE-2021-28704) and XENMEM_populate_physmap (CVE-2021-28707), the latter usable only by domains controlling the guest, i.e. a de-privileged qemu or a stub domain. (Patch 1, combining the fix to both these two issues.) In addition handling of XENMEM_decrease_reservation can also trigger a host crash when the specified page order is neither 4k nor 2M nor 1G (CVE-2021-28708, patch 2).

PoD operations on misaligned GFNs T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] x86 HVM and PVH guests may be started in populate-on-demand (PoD) mode, to provide a way for them to later easily have more memory assigned. Guests are permitted to control certain P2M aspects of individual pages via hypercalls. These hypercalls may act on ranges of pages specified via page orders (resulting in a power-of-2 number of pages). The implementation of some of these hypercalls for PoD does not enforce the base page frame number to be suitably aligned for the specified order, yet some code involved in PoD handling actually makes such an assumption. These operations are XENMEM_decrease_reservation (CVE-2021-28704) and XENMEM_populate_physmap (CVE-2021-28707), the latter usable only by domains controlling the guest, i.e. a de-privileged qemu or a stub domain. (Patch 1, combining the fix to both these two issues.) In addition handling of XENMEM_decrease_reservation can also trigger a host crash when the specified page order is neither 4k nor 2M nor 1G (CVE-2021-28708, patch 2).

PoD operations on misaligned GFNs T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] x86 HVM and PVH guests may be started in populate-on-demand (PoD) mode, to provide a way for them to later easily have more memory assigned. Guests are permitted to control certain P2M aspects of individual pages via hypercalls. These hypercalls may act on ranges of pages specified via page orders (resulting in a power-of-2 number of pages). The implementation of some of these hypercalls for PoD does not enforce the base page frame number to be suitably aligned for the specified order, yet some code involved in PoD handling actually makes such an assumption. These operations are XENMEM_decrease_reservation (CVE-2021-28704) and XENMEM_populate_physmap (CVE-2021-28707), the latter usable only by domains controlling the guest, i.e. a de-privileged qemu or a stub domain. (Patch 1, combining the fix to both these two issues.) In addition handling of XENMEM_decrease_reservation can also trigger a host crash when the specified page order is neither 4k nor 2M nor 1G (CVE-2021-28708, patch 2).

grant table v2 status pages may remain accessible after de-allocation (take two) Guest get permitted access to certain Xen-owned pages of memory. The majority of such pages remain allocated / associated with a guest for its entire lifetime. Grant table v2 status pages, however, get de-allocated when a guest switched (back) from v2 to v1. The freeing of such pages requires that the hypervisor know where in the guest these pages were mapped. The hypervisor tracks only one use within guest space, but racing requests from the guest to insert mappings of these pages may result in any of them to become mapped in multiple locations. Upon switching back from v2 to v1, the guest would then retain access to a page that was freed and perhaps re-used for other purposes. This bug was fortuitously fixed by code cleanup in Xen 4.14, and backported to security-supported Xen branches as a prerequisite of the fix for XSA-378.

PCI devices with RMRRs not deassigned correctly Certain PCI devices in a system might be assigned Reserved Memory Regions (specified via Reserved Memory Region Reporting, "RMRR"). These are typically used for platform tasks such as legacy USB emulation. If such a device is passed through to a guest, then on guest shutdown the device is not properly deassigned. The IOMMU configuration for these devices which are not properly deassigned ends up pointing to a freed data structure, including the IO Pagetables. Subsequent DMA or interrupts from the device will have unpredictable behaviour, ranging from IOMMU faults to memory corruption.

Another race in XENMAPSPACE_grant_table handling Guests are permitted access to certain Xen-owned pages of memory. The majority of such pages remain allocated / associated with a guest for its entire lifetime. Grant table v2 status pages, however, are de-allocated when a guest switches (back) from v2 to v1. Freeing such pages requires that the hypervisor enforce that no parallel request can result in the addition of a mapping of such a page to a guest. That enforcement was missing, allowing guests to retain access to pages that were freed and perhaps re-used for other purposes. Unfortunately, when XSA-379 was being prepared, this similar issue was not noticed.

xen/arm: No memory limit for dom0less domUs The dom0less feature allows an administrator to create multiple unprivileged domains directly from Xen. Unfortunately, the memory limit from them is not set. This allow a domain to allocate memory beyond what an administrator originally configured.

inadequate grant-v2 status frames array bounds check The v2 grant table interface separates grant attributes from grant status. That is, when operating in this mode, a guest has two tables. As a result, guests also need to be able to retrieve the addresses that the new status tracking table can be accessed through. For 32-bit guests on x86, translation of requests has to occur because the interface structure layouts commonly differ between 32- and 64-bit. The translation of the request to obtain the frame numbers of the grant status table involves translating the resulting array of frame numbers. Since the space used to carry out the translation is limited, the translation layer tells the core function the capacity of the array within translation space. Unfortunately the core function then only enforces array bounds to be below 8 times the specified value, and would write past the available space if enough frame numbers needed storing.

long running loops in grant table handling In order to properly monitor resource use, Xen maintains information on the grant mappings a domain may create to map grants offered by other domains. In the process of carrying out certain actions, Xen would iterate over all such entries, including ones which aren't in use anymore and some which may have been created but never used. If the number of entries for a given domain is large enough, this iterating of the entire table may tie up a CPU for too long, starving other domains or causing issues in the hypervisor itself. Note that a domain may map its own grants, i.e. there is no need for multiple domains to be involved here. A pair of "cooperating" guests may, however, cause the effects to be more severe.

grant table v2 status pages may remain accessible after de-allocation Guest get permitted access to certain Xen-owned pages of memory. The majority of such pages remain allocated / associated with a guest for its entire lifetime. Grant table v2 status pages, however, get de-allocated when a guest switched (back) from v2 to v1. The freeing of such pages requires that the hypervisor know where in the guest these pages were mapped. The hypervisor tracks only one use within guest space, but racing requests from the guest to insert mappings of these pages may result in any of them to become mapped in multiple locations. Upon switching back from v2 to v1, the guest would then retain access to a page that was freed and perhaps re-used for other purposes.

IOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI properties, they can also be specified to apply to a range of devices, or even all devices. On all systems with such regions Xen failed to prevent guests from undoing/replacing such mappings (CVE-2021-28694). On AMD systems, where a discontinuous range is specified by firmware, the supposedly-excluded middle range will also be identity-mapped (CVE-2021-28695). Further, on AMD systems, upon de-assigment of a physical device from a guest, the identity mappings would be left in place, allowing a guest continued access to ranges of memory which it shouldn't have access to anymore (CVE-2021-28696).

IOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI properties, they can also be specified to apply to a range of devices, or even all devices. On all systems with such regions Xen failed to prevent guests from undoing/replacing such mappings (CVE-2021-28694). On AMD systems, where a discontinuous range is specified by firmware, the supposedly-excluded middle range will also be identity-mapped (CVE-2021-28695). Further, on AMD systems, upon de-assigment of a physical device from a guest, the identity mappings would be left in place, allowing a guest continued access to ranges of memory which it shouldn't have access to anymore (CVE-2021-28696).

IOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI properties, they can also be specified to apply to a range of devices, or even all devices. On all systems with such regions Xen failed to prevent guests from undoing/replacing such mappings (CVE-2021-28694). On AMD systems, where a discontinuous range is specified by firmware, the supposedly-excluded middle range will also be identity-mapped (CVE-2021-28695). Further, on AMD systems, upon de-assigment of a physical device from a guest, the identity mappings would be left in place, allowing a guest continued access to ranges of memory which it shouldn't have access to anymore (CVE-2021-28696).

xen/arm: Boot modules are not scrubbed The bootloader will load boot modules (e.g. kernel, initramfs...) in a temporary area before they are copied by Xen to each domain memory. To ensure sensitive data is not leaked from the modules, Xen must "scrub" them before handing the page over to the allocator. Unfortunately, it was discovered that modules will not be scrubbed on Arm.

inappropriate x86 IOMMU timeout detection / handling IOMMUs process commands issued to them in parallel with the operation of the CPU(s) issuing such commands. In the current implementation in Xen, asynchronous notification of the completion of such commands is not used. Instead, the issuing CPU spin-waits for the completion of the most recently issued command(s). Some of these waiting loops try to apply a timeout to fail overly-slow commands. The course of action upon a perceived timeout actually being detected is inappropriate: - on Intel hardware guests which did not originally cause the timeout may be marked as crashed, - on AMD hardware higher layer callers would not be notified of the issue, making them continue as if the IOMMU operation succeeded.

x86: TSX Async Abort protections not restored after S3 This issue relates to the TSX Async Abort speculative security vulnerability. Please see https://xenbits.xen.org/xsa/advisory-305.html for details. Mitigating TAA by disabling TSX (the default and preferred option) requires selecting a non-default setting in MSR_TSX_CTRL. This setting isn't restored after S3 suspend.

HVM soft-reset crashes toolstack libxl requires all data structures passed across its public interface to be initialized before use and disposed of afterwards by calling a specific set of functions. Many internal data structures also require this initialize / dispose discipline, but not all of them. When the "soft reset" feature was implemented, the libxl__domain_suspend_state structure didn't require any initialization or disposal. At some point later, an initialization function was introduced for the structure; but the "soft reset" path wasn't refactored to call the initialization function. When a guest nwo initiates a "soft reboot", uninitialized data structure leads to an assert() when later code finds the structure in an unexpected state. The effect of this is to crash the process monitoring the guest. How this affects the system depends on the structure of the toolstack. For xl, this will have no security-relevant effect: every VM has its own independent monitoring process, which contains no state. The domain in question will hang in a crashed state, but can be destroyed by `xl destroy` just like any other non-cooperating domain. For daemon-based toolstacks linked against libxl, such as libvirt, this will crash the toolstack, losing the state of any in-progress operations (localized DoS), and preventing further administrator operations unless the daemon is configured to restart automatically (system-wide DoS). If crashes "leak" resources, then repeated crashes could use up resources, also causing a system-wide DoS.

In Xen 4.10, new infrastructure was introduced as part of an overhaul to how MSR emulation happens for guests. Unfortunately, one tracking structure isn't freed when a vcpu is destroyed. This allows guest OS administrators to cause a denial of service (host OS memory consumption) by rebooting many times.

arch/x86/mm.c in Xen allows local PV guest OS users to gain host OS privileges via vectors related to map_grant_ref.

Xen allows local OS guest users to cause a denial of service (crash) or possibly obtain sensitive information or gain privileges via vectors involving transitive grants.

The xen_biovec_phys_mergeable function in drivers/xen/biomerge.c in Xen might allow local OS guest users to corrupt block device data streams and consequently obtain sensitive memory information, cause a denial of service, or gain host OS privileges by leveraging incorrect block IO merge-ability calculation.

The x86 emulator in Xen does not properly treat x86 NULL segments as unusable when accessing memory, which might allow local HVM guest users to gain privileges via vectors involving "unexpected" base/limit values.

Xen, when running on a 64-bit hypervisor, allows local x86 guest OS users to modify arbitrary memory and consequently obtain sensitive information, cause a denial of service (host crash), or execute arbitrary code on the host by leveraging broken emulation of bit test instructions.

The pygrub boot loader emulator in Xen, when nul-delimited output format is requested, allows local pygrub-using guest OS administrators to read or delete arbitrary files on the host via NUL bytes in the bootloader configuration file.

The pygrub boot loader emulator in Xen, when S-expression output format is requested, allows local pygrub-using guest OS administrators to read or delete arbitrary files on the host via string quotes and S-expressions in the bootloader configuration file.

Heap-based buffer overflow in the pcnet_receive function in hw/net/pcnet.c in QEMU allows guest OS administrators to cause a denial of service (instance crash) or possibly execute arbitrary code via a series of packets in loopback mode.

The qemu implementation in libvirt before 1.3.0 and Xen allows local guest OS users to cause a denial of service (host disk consumption) by writing to stdout or stderr.